Single core wires with pvc insulation
Single core wires with PVC insulation actually consist of a set of twisted wires. These types of wires are produced from at least 7 strands from 0.5 to 19 strands to 7
Technical Specifications:
Single core wires with PVC insulation and annealed copper conductor
Reference standard:
ISRI 607-3
IEC 60227-3
Rated voltage :
300/500V for conductors up to 1mm²
450/750V for conductors with a cross section greater than 1mm²
Temperature requirements and temperature range:
The maximum working temperature of the conductor: 70 degrees Celsius
In fixed installation mode: -30 to +80 degrees Celsius
In bending mode: -5 to +70 degrees Celsius
Structure of layers:
Cu/PVC
Wire structure:
Conductor type and class: annealed copper, class 1 (meftoli), for conductors up to 16mm² and class 2 (semi-diffuse) for all conductor sizes, in accordance with the national standard
IEC 60228) ISIRI 3084)
Insulation material: PVC type C mixture
Insulation coloring: according to customer request
Application:
These types of wires are used for fixed installation as connection wires in underground ducts, machines and control panels that need a lot of flexibility. Direct placement of these types of wires on cable trays, channels or tanks is not allowed, but placement inside the pipe and under plaster is allowed.
